Welcome to Charge Control C User Guide!

Charge Control C is an IEC 61851 and ISO 15118 compliant charging controller, born to beat in every kind of electric AC vehicle charging station. This user guide explains the possibilities of setting up such a system with the Charge Control C, based on the open source charging stack EVerest.

This documentation starts with a short introduction and then goes straight into a hands-on chapter Getting Started with a simple example of how to set up a simple AC charger based on the Charge Control C.

Contents:

• Introduction
  • Product Description
  • Product Features
  • Safety Notes
  • Order Information
• Getting Started
  • Setting Up the Hardware
  • First Startup
  • Connecting via SSH or Serial Interface
  • Initial Configuration
  • Starting and Monitoring the Charging Process
• Hardware
  • HMI
  • Mechanical Dimensions
  • Mounting
  • Hardware Interfaces
  • Board Connections
  • Device Marking
• Firmware
  • Introduction to Yocto
  • Programming
  • Firmware Upgrade
• EVerest charging stack
  • Introduction to EVerest
  • Basic configuration
  • Required modules for Charge Control C
  • Further reading
• CB energy
  • Introduction CB energy
  • CB energy app
  • Setup and configuration
  • Client discovery
  • User setup
  • Setup of ecosystem
  • Home screen
  • Supported devices
  • Manual connection option
• Development
  • Setting up Yocto Build Environment
  • Adding a Custom EVerest Module
  • Creating a Development Image
  • Cross-compiling for Tarragon
• Troubleshooting
  • Frequently Asked Questions
  • Contact